EvoHide Oasis

Sales Rep Locator Product Color Card
  • Finished Width: 54 inches
  • Roll Size: 30 linear yards
  • Standard Weight: 30+/-4.0 oz per linear yard
  • Thickness: 42+/-4.0 mils
  • Cold Crack: -25°
  • 1000 Hours WeatherOmeter Resistance
  • Abrasion resistance: No Significant wear after 30,000 cycles with #8 cotton duck using the Wyzenbeek test method
  • EN 1021-1 and 2
  • Cal TB 117-2013 (Section 1-Cover Fabric)

This product has been developed to emulate the look and
feel of soft leather. The unique super dull finish is designed
to be low burnishing, non-polishing and resistant to ultraviolet

Our vinyls have superb tailoring qualities, which make
pre-heating and steaming unnecessary and are not
recommended in the fabrication process.

Because of the special leather-like finish, additional
precautions should be observed when processing and
cleaning. Please avoid contact with marking inks, glues and
other staining materials that may damage vinyl during
manufacturing. Protecting seating with a clean polyethylene
cover, as is common in the automotive industry, should
enable you to deliver a stain-free unit to the customer.
If, despite all precautions, staining material does come in
contact with our vinyls, cleaning should be immediate and
should follow these instructions:

• Dry soil, Dust and Dirt, Dried on Dirt: Remove with soft cloth
dampened with water.
• Variation in Surface Gloss: Wipe with a soft cloth dampened
with water. Allow to air dry.
• Stubborn Dirt: Wash with a soft cloth moistened with a mild
soap and water. Rinse with clean water.
• Stubborn Spots and Stains: Spray with either Formula 409®,
or CRC 40173 Tannery Leather, Vinyl & More Cleaner &
Conditioner, wiping with a soft cloth. Rinse with clean water.
• Liquid Spills: Wipe immediately with a clean absorbent
cloth. Rinse with clean water.
• Food, Grease, and Oily Stains: Spray immediately using
either Formula 409®, or CRC 40173 Tannery Leather, Vinyl &
More Cleaner & Conditioner, wiping with a soft cloth.
Take care not to extend the area of contamination beyond its
original boundary. Rinse with clean water.

Our vinyls should be periodically cleaned to maintain their
appearance and prevent build-up of dirt and contaminants.
Any stain, spill or soiling should be cleaned up promptly to
prevent permanent staining. When cleaning, always rub

Caution: Powdered abrasives, abrasive cleaners, and steel
wool damage vinyl, as do strong solvents, lacquer solvents
and inks. Lotions, suntan oil, waxes and polishes, etc., oils
and dyes that can cause stiffening and staining of vinyls.
Never use heat guns or hair dryers.

Note: Stronger cleaners, detergents, and solvents may be
effective in stain removal but can cause either immediate
damage or slow deterioration. Many such materials are
wrongly recommended in marine and other related industries.
The use of such cleaners is at the owner's own risk.

This information is offered for your general guidance only. It is
accurate to the best of our knowledge at the time of printing,
but it is not intended to relieve the user from their
responsibility to investigate and understand other pertinent
sources of information and to comply with the laws and
procedures applicable to the safe handling and use of this material.

Market Application


Product Features

Chemical ResistantChemical Resistant
Flame ResistantFlame Resistant
Made in North AmericaMade in North America